Navigant Research Blog

Going Zero Waste

— January 4, 2018

Greenbuild International Conference and Expo, which took place in Boston during November 2017, had something for everyone in the realm of green buildings—education sessions with topics ranging from human health and net zero energy to innovation and technology. It also had an expo hall with roughly 700 vendors and impressive speakers such as former President Bill Clinton, astrophysicist Neil deGrasse Tyson, and the US Green Building Council (USGBC) President and CEO Mahesh Ramanujam. Greenbuild is the world’s largest conference and expo devoted to green building. It is owned by Informa Exhibitions and is presented by USGBC.

Zero Waste Events and Goals

Throughout the event, one thing that struck me was the commitment of the conference organizers to waste diversion. There were dozens of three-container bins split for recycling, composting, and trash. Each segment was marked with images to minimize confusion. In addition to the signage, a volunteer was stationed at each receptacle to ensure attendees put waste in the correct compartment. This strategy to reduce waste at Greenbuild was implemented in 2016 when the conference was held in Los Angeles, California, and it resulted in the highest diversion rate ever for Greenbuild. The collaboration of Informa Exhibitions, USGBC, the Los Angeles Convention Center, local haulers, and other partners led to a 90% waste diversion rate and an 18% increase over the convention center’s baseline conversion rate. Data on waste diversion from the 2017 Greenbuild conference is not yet available.

On September 16, 2015, the US Environmental Protection Agency (EPA) and US Department of Agriculture (USDA)—in alignment with the United Nations Sustainable Development Goal 12announced the first US-based goal to reduce food loss and waste by half by the year 2030. Since the 1990s, cities have slowly started to set zero waste goals, with San Francisco, California and Oakland, California being two of many cities to set zero waste targets with the goal of having zero waste by 2020. Zero waste events can help cities reach waste reduction and zero waste goals, and this type of event might be required by some cities. Additionally, a zero waste event can attract sponsors that share the priority of reducing waste. Many companies, including Subaru, Sierra Nevada, Toyota, and Microsoft, among a growing list of others, have set zero waste goals.

Reduce, Reuse, Recycle

The efforts of Greenbuild are impressive for a conference of its size. If every large conference prioritized waste reduction as much as this event, the amount of waste diverted from landfills would be significant. Beyond diverting waste from landfills, creating less waste initially—or reusing items—creates less waste that needs diverting. I watched as the booths were taken down and I was struck by the pure amount of materials it took to fill an expo hall of that size: banners, giveaways, tables, extension cords, yards of carpet, and more. While some things can be reused at future events and this is a component of a zero waste event, not all materials are reused.

According to the EPA, Americans produce an average of 4.4 pounds of waste per person per day. Reducing the overall materials needed at conferences or in daily lives can help the total waste that will end up in a landfill. All items, even those recycled and composted, require materials to make them and energy to break them down. Following the first of the R guidelines, reduce, can have an overall effect on the materials to be reused and recycled by lessening the materials to be reused and recycled. Reducing society’s overall consumption and working toward zero waste in events and in the average consumer’s daily life will not happen overnight, but are ultimately achievable with time and practice.

 

Organizations Work to Combat Security and Interoperability Concerns Surrounding IoT

— November 21, 2017

According to Navigant Research’s new IoT for Lighting report, global market revenue for Internet of Things (IoT) lighting is expected to grow from $651.1 million in 2017 to $4.5 billion in 2026. With the growing number of connected devices and plethora of continual new data generation, data security is a top concern. It is seen as a barrier to adoption for IoT lighting and other IoT technologies within the commercial building space. However, despite the challenges surrounding security, there are organizations that are working to improve security and address other key concerns, such as interoperability.

Addressing Security Concerns

A non-profit, the IoT Security Foundation (IoTSF) aims to make it secure to connect the growing number of connected devices so the benefits of IoT can be realized. In September 2017, IoTSF announced a Smart Buildings Working Group. The key function of the group will be to establish comprehensive guidelines to help each supply chain participant specify, procure, install, integrate, operate, and maintain IoT security in buildings. Intelligent building equipment and controls such as lighting, HVAC, fire, building security, and audiovisual will be included.

The Smart Buildings Working Group, though in its infancy, has already received positive feedback and responses to partnership requests from technology firms. Lighting vendors are starting to express interest, as well. The growing list of partners and participants includes Oracle, Honeywell, and global engineering firm Norman Disney & Young.

Fighting Interoperability

Many IoT lighting systems and lighting control systems are proprietary or modified versions of standards, such as ZigBee. Some customers prefer proprietary systems, as this can simplify discussion over a responsible party for any possible system malfunctions. However, for many, this leads to confusion around which systems to purchase and to fear that components or an entire system might become obsolete. Additionally, this limits coordinated controls within a smart building and can limit the idea of holistic operations within a building.

There are groups, such as the IoT Ready Alliance and the DesignLights Consortium (DLC), working to address interoperability for IoT lighting and other IoT devices. The vision of the IoT Ready Alliance is interoperability and future-proofing of lighting products and services. By helping to expand the number of products that are IoT ready, consumers are not required to make the decision right away. This essentially helps in future-proofing lighting in a time where continued technology advancements can make the decision to upgrade to an advanced lighting system difficult.

The DLC is also helping to drive the widespread adoption networked lighting controls through its Networked Lighting Controls Specification program by providing tools and resources for utilities, energy efficiency programs, and the lighting industry.

Marching Forward

While there are organizations to address these barriers to widespread adoption, the fight to combat security and interoperability concerns within the commercial lighting market and the broader IoT space has just begun. Organizations such as IoTSF, DLC, and IoT Ready Alliance, while making progress, cannot combat these issues alone.

Industry players from lighting manufacturers to startups to tech firms will need to provide support and partnerships for these organizations in order to achieve an optimal outcome. Although initial feedback to these organizations and their work is reassuring and a step in the right direction, time will determine the full support and true success of these programs.

 

Focus on Occupant Health and Well-Being Is Transforming the Commercial Buildings Market

— October 25, 2017

There has been growing interest and demand for occupant health and well-being in commercial buildings. Historically, occupant health policy was more limited and focused on preventing accidents and exposure to hazardous materials. In recent years, there has been a shift from the minimal safety requirements to improved health, increased productivity and performance, and enhanced occupant comfort.

Occupant health and well-being is a notable theme. The focus of the Greenbuild International Conference and Expo this November is human health. Educational sessions covering this area range from The Wellness/Energy Nexus – a Case for Effective Design (WELL Specific) to From Lab to Workplace: Research Advancing Health & Wellbeing.

Based on the human health educational track at the conference, it is clear that conference organizers and speakers alike view this as an essential building trend. It is a trend observed at Navigant Research and discussed as a driver in the upcoming report IoT for Lighting. I’m looking forward to attending Greenbuild to further explore this trend and learn about efforts to promote health and well-being through lighting and building technologies.

Motivation for Human Health in Buildings

A report from the US Green Building Council’s (USGBC) 2013 Summit on Green Building & Human Health is titled Health is a Human Right. Green Building Can Help. While much in the development of green buildings and occupant health and well-being has progressed since 2013, the notion that health is a human right has not.

The trend to focus on human health and well-being within buildings can largely be attributed to attracting and maintaining talent in office workplaces, incentivizing students or shoppers to build environments that focus on their health. Many green building features, such as energy efficient lighting paired with more sophisticated controls, provide motivation via energy savings in addition to improving the health of building occupants. Beyond lighting, occupant health and well-being can be prioritized through improved indoor air quality, thermal comfort, and sound quality.

Promotion of WELL-Being through Standards and Certifications

Founded in 2013, the International WELL Building Institute (IWBI) is a public benefit organization driving the promotion of health and well-being in buildings. The WELL Building Standard, launched in 2014, is based on medical research that analyzes the connection between environmental health, behavioral factors, health outcomes, and demographic risk factors that affect health with the built environment. The WELL Standard covers seven core concepts (air, water, nourishment, light, fitness, comfort, and mind) to create a flexible building standard.

Currently, there are pilot programs in progress across various areas, including multi-family residential buildings, education facilities, retail buildings, restaurants, and commercial kitchens. The aim of the pilot programs is to test and refine how WELL can best apply to different building and space types. The standard continues to evolve based on new evidence, and to incorporate new technologies. A WELL certification is a declaration of that building’s commitment to the prioritization of its inhabitants.

Certifications Setting an Example

The USGBC has incorporated the Integrative Process for Health Promotion in the LEED certification for new construction. Participants can earn credit by beginning in the pre-design phase to “achieve synergies that promote health across disciplines and building systems.” They can also work with a public health partner to help determine how to promote health and accomplish related sustainability goals.

While the USGBC and IWBI are not required across buildings and are voluntary certifications, the significance they place on human health in buildings is helping to promote these values and drive increased focus on these trends. These organizations can provide tools and resources for building owners and managers and can help drive the adoption of building elements focused on the health and well-being of building occupants.

 

IoT Provides a Changing Landscape for Lighting

— September 5, 2017

The commercial lighting landscape is shifting these days, giving way to a less siloed market. While historically, lamp and luminaire manufacturers have focused primarily on lamps, the emergence and growth of LEDs with their increased lifespan has led to a stronger market for luminaires, which in turn has negatively affected the lamp market. This has decreased lamp revenue for many incumbent lighting manufacturers.

In order to differentiate themselves within the shifting lighting market, traditional lamp and luminaire manufacturers are looking toward controls and new business use cases. Some use cases provided by lighting controls fall within the Internet of Things (IoT) landscape. Many lighting companies are entering the controls and IoT markets through mergers and acquisitions, rather than focusing solely on internal expansion into those areas.

OSRAM Makes Play toward Increasing IoT Offerings

The German-based lighting manufacturer OSRAM, a spinoff of Siemens in early 2013, has agreed to purchase Digital Lumens. Founded in 2008, the Boston-based industrial and commercial IoT solutions company offers software, products, and systems integration. Digital Lumens’ SiteWorx platform integrates intelligent lighting control, energy use, security systems, and air quality monitoring. The IoT platform will allow OSRAM to strengthen its portfolio for IoT applications. There are currently plans to integrate some of OSRAM’s existing digital services into the platform, such as location-based services utilizing Bluetooth primarily in a retail environment.

Competitive Landscape

While OSRAM has clearly positioned itself to advance its IoT offerings, it faces competition from other lighting incumbents interested in expanding their IoT offerings. Earlier this year, Acuity Brands announced its Atrius Brand, the company’s IoT business solutions portfolio. Atrius provides connectivity through a network of intelligent LED lighting and controls and its software platform that enables indoor positioning, asset tracking, space utilization, spatial analytics, and energy management.

Philips Lighting is also an incumbent that has expanded into this space with its indoor positioning for retail applications and connected lighting for offices utilizing Power over Ethernet (PoE) and SpaceWise wireless technology. Another is Eaton, which has partnered with IoT platform, sensor, and solutions company Enlighted to integrate the company’s hardware, software, and services into Eaton’s LED lighting and controls portfolio.

The technology developments, acquisitions, and partnerships all demonstrate the shifting market and provide a glimpse into the future of commercial lighting. Startups, systems integrators, IT companies, and network providers are mixing with the traditional lighting manufacturers in this market, providing more collaboration and merger and acquisition opportunities. Navigant Research’s upcoming IoT for Lighting report will look at the key players in this industry and provide an overview of the market, including drivers and barriers, technology issues, and a global forecast of hardware, software, and services.

 

Blog Articles

Most Recent

By Date

Tags

Clean Transportation, Digital Utility Strategies, Electric Vehicles, Energy Technologies, Finance & Investing, Policy & Regulation, Renewable Energy, Smart Energy Program, Transportation Efficiencies, Utility Transformations

By Author


{"userID":"","pageName":"Krystal Maxwell","path":"\/author\/kzayas-wright?page=2","date":"5\/23\/2018"}